You wish to SSH on to your InvizBox Go. Here is how to setup an SSH access to the InvizBox Go (only attempt these if you understand SSH and Linux command line).
- Access your InvizBox Go's Administration Interface
- Go to the Profiles page
- Select your Profile and enter Edit mode
- Enable SSH using the toggle switch in the Remote Access section
- Make sure you save the Profile as it has been modified
- Also make sure you associate that Profile with the intended Network(s) if not already done
You will now be able to SSH into your InvizBox Go on Networks the Profile is associated with.
I used my WiFi / UI password and it was denied
Please sign in to leave a comment.