InvizBox Go - Firmware 4.4.1 (latest) – InvizBox

Important: This firmware is only for the InvizBox Go which is pictured below:

This release focuses on fixing some of the most common issues users have been having problems with.

Changelog 30/04/2024:

Added support for newer Android and iOS devices
Moved underlying VPN for InvizBox VPN customers from 3rd party to in-house
Added more specific information to the API when VPN connections are failing
Added UI to guide users when their OpenVPN credentials are incorrect
Compressed Administration Interface images to decrease firmware size
Fixed some cosmetic issues in the Administration Interface
Added support for upgraded WiFi on certain InvizBox 2 devices
Updated the InvizBox 2 wireless configuration so that WiFi is more reliable when lots of networks are up simultaneously
Fixed an issue where the 5GHz WiFi range was poor on certain InvizBox 2 devices
Consolidated firmware updates for different providers to come from one endpoint
Updated initial boot code to recognize the presence of different WiFi chips

Plug in your InvizBox Go, make sure it is connected and functional. Your device will check for updates within the first hour of it being plugged in, at that stage a banner will be available in the Administration Interface for you to upgrade. (You can also speed that up from the System - Firmware page by Checking for Firmware Update)
Click the banner which will bring you to the Firmware page (if not already there).
On the Firmware page, identify the update section (highlighted in blue) and click "Install Update"
Make sure you don't unplug your InvizBox Go until after you have logged back in the new Administration Interface:
- this may take up to 10 minutes - be patient
- you may need to get back on the Wi-Fi network if you got disconnected during the upgrade
- If after ten minutes, nothing happens, you can try to access the Administration Page in a new page of your browser (http://inviz.box or http://10.153.146.1)

Plug in your InvizBox Go, make sure it is connected and functional.
Update the Administration Interface App from you app store.
Connect your phone to your InvizBox Go network and open the Administration App.
If the App tells you an update is needed but not downloaded yet, click Check for Update
Once the update is downloaded on your InvizBox Go, the App will provide you with an update button to install it.
Make sure you don't unplug your InvizBox Go until after you have logged back in the new Administration Interface:
- this may take up to 10 minutes - be patient
- you may need to get back on the Wi-Fi network if you got disconnected during the upgrade
- If after ten minutes, nothing happens, you can try restarting the App